Widemouth 2 Fire — Latest News & Live Update
Millard County, UT
FireRisk.ai · Updated August 10, 2026
🔺 Fire grew 290 acres since the last report — it is still spreading.
⚠️ Containment dropped 1% — the fire broke through previously controlled lines.
The Widemouth 2 Fire in Millard County, Utah, has grown by 290 acres since the last report, now covering 118,086 acres as containment slipped one percentage point to 26 percent. The fire was discovered naturally on July 27 and remains in active, early suppression across the majority of its perimeter, with crews working to establish and extend control lines on a front driven primarily by timber litter and understory fuels.
Suppression efforts have deployed 848 personnel across the Complex Incident Management Team operation. The one-point drop in containment despite increased acreage indicates crews are being stretched as the fire continues to advance faster than containment gains are being made, suggesting active, ongoing spread across uncontrolled sections of the fire's edge.
The fire stands at a critical stage — losses are outpacing containment progress. The response will need to stabilize the growth rate before conditions allow crews to move from holding ground to shrinking the perimeter. Residents in the affected area should follow evacuation orders and guidance from Millard County and state authorities.
FireRisk.ai covers active wildfire incidents and home fire risk using official NIFC, National Weather Service, and NASA FIRMS data. Briefings are generated automatically from verified official feeds and reviewed for accuracy.
Update timeline
The Widemouth 2 Fire in Millard County, Utah, has grown by 290 acres since the last report, now covering 118,086 acres as containment slipped one percentage point to 26 percent. The fire was discovered naturally on July 27 and remains in active, early suppression across the majority of its perimeter, with crews working to establish and extend control lines on a front driven primarily by timber litter and understory fuels.
The Widemouth 2 Fire, burning in Millard County, Utah, has held steady at 114,957 acres with no growth or containment progress recorded since the last report. The fire was discovered on July 27 and is now in its second full week of active suppression. Containment stands at 27 percent, meaning crews remain in early, aggressive suppression operations across most of the fire's perimeter, with no significant portion yet held at defensive positions.
The Widemouth 2 Fire in Millard County, Utah, grew by 1,040 acres in the past day, bringing the total burned area to 106,450 acres since its discovery on July 27. The fire was caused by natural ignition and has consumed primarily timber litter and understory fuels across its footprint. Containment rose 5 percentage points to 24 percent, indicating that crews remain in active suppression across the majority of the perimeter but have not yet established a stable defensive line.
The Widemouth 2 Fire, burning in Millard County, Utah, has held steady at 105,410 acres with no growth or containment progress reported in the past 24 hours. The fire was discovered on July 27 and has burned for 11 days. Containment remains at 19 percent, indicating that crews are in early, active suppression across most of the fire's perimeter.
The Widemouth 2 Fire has held steady at 96,702 acres with containment unchanged at 10 percent, according to the latest interagency report. Discovered July 27 in Millard County, Utah, the fire was caused by natural ignition and continues to burn through timber fuel consisting of litter and understory material. No growth has been recorded since the previous day's count, though the minimal containment figure indicates crews remain in early, active suppression across most of the fire's perimeter.
The Widemouth 2 Fire in Millard County, Utah, remains uncontained nine days after discovery on July 27, holding at 84,409 acres with no change in size or containment progress since the last report. The fire, sparked by natural causes, continues to burn through timber litter and understory fuel, and crews have not yet established a perimeter line.
The Widemouth 2 Fire, discovered July 27 in Millard County, Utah, has grown to 68,191 acres with no containment established as of August 4. The fire remains uncontained eight days after ignition, burning through chaparral fuel averaging six feet in height—conditions that enable rapid spread and complicate suppression efforts.
The Widemouth 2 Fire has burned 68,191 acres in Millard County, Utah, since it was discovered on July 27. The fire remains at zero containment as of August 3, meaning crews are in active suppression across the entire perimeter with no contained line yet established. The blaze started from a natural cause and is burning through chaparral fuel averaging 6 feet in height, conditions that typically sustain rapid spread and make initial control difficult.
Firefighting aircraft over this fire
Live ADS-BLatest news — Widemouth 2 Fire
Auto-updating
News links open third-party sites. For official evacuation orders follow your local fire authority and 911.
Widemouth 2 Fire — current status questions
Is the Widemouth 2 Fire contained?
As of August 10, 2026, the Widemouth 2 Fire is 26% contained in Millard County, UT. Containment means that percentage of the fire's perimeter has been secured by crews — the fire can still burn inside those lines. At this early stage, crews are focused on building and holding containment lines around the most active flanks. Follow your local fire authority for evacuation status.
How big is the Widemouth 2 Fire?
As of August 10, 2026, the Widemouth 2 Fire has burned 118,086 acres in Millard County, UT. Wildfire acreage is the estimated total area inside the fire perimeter — it is updated as aerial and ground crews assess the boundary and changes frequently on active fires. One acre is roughly the size of a football field; 184.5 square miles.
When did the Widemouth 2 Fire start?
The Widemouth 2 Fire was first reported on July 27, 2026 (13 days ago) in Millard County, UT. The reported cause is natural. The fire's discovery date is reported by the incident agency to the National Interagency Fire Center (NIFC).
What caused the Widemouth 2 Fire?
According to NIFC reporting, the Widemouth 2 Fire was caused by natural. Cause determinations are made by trained fire investigators and may be updated as the investigation proceeds.
How many firefighters are working on the Widemouth 2 Fire?
As of August 10, 2026, 848 total personnel are assigned to the Widemouth 2 Fire according to NIFC. This figure includes all positions on the incident — engine crews, hand crews, dozers, aircraft, logistics, and incident management team members. Large fires typically involve resources from multiple agencies and can draw crews from across the country when local resources are stretched.
How much has the Widemouth 2 Fire cost so far?
The estimated cost to suppress the Widemouth 2 Fire is $20.2 million as of August 10, 2026, according to NIFC. Wildfire suppression costs include personnel, equipment, aircraft, and logistical support. Large fires often cost millions of dollars per day at peak operations, and total costs continue to accumulate until the fire is fully contained and crews demobilize.
Who is managing the Widemouth 2 Fire response?
The Widemouth 2 Fire is being managed by Complex Incident Management Team. Wildfire incident management teams (IMTs) are classified by complexity (Type 1 being the most complex). They coordinate all suppression resources — crews, aircraft, equipment — and produce the official daily situation reports posted to InciWeb.
Wildfire questions — Widemouth 2 Fire area
Answers apply to all active wildfires; specifics use Widemouth 2 Fire data where available.
What does the containment percentage mean for the Widemouth 2 Fire?
Containment percentage is the share of the fire's perimeter that crews have physically secured — typically by cutting a firebreak or reaching a natural barrier like a road or river. A fire at 40% contained means 40% of the edge has a line that crews are confident will hold; the remaining 60% is still open. The fire can continue burning inside those lines even at high containment. Full containment (100%) means the entire perimeter is secured, though the fire may still smolder inside for weeks during mop-up.
How is wildfire acreage measured?
Wildfire acreage is the estimated total area enclosed within the fire's perimeter, not just the actively burning area. Crews and aircraft sketch the perimeter using GPS tracks, aerial infrared flights (typically flown at night), and satellite imagery. Because mapping lags the actual fire edge by hours to days, reported acreage is always an estimate — especially on a fast-moving fire. One square mile equals 640 acres; compare the acreage figure to the map perimeter for a sense of scale.
Is the smoke from the Widemouth 2 Fire dangerous to breathe?
Wildfire smoke contains fine particles (PM2.5), carbon monoxide, and other compounds that are harmful to breathe — especially for children, the elderly, pregnant women, and anyone with heart or lung conditions. When AQI (Air Quality Index) is in the "Unhealthy" range (151+), everyone should reduce outdoor activity. At "Very Unhealthy" (201+), stay indoors with windows closed, run an air purifier if you have one, and wear an N95 or KN95 mask if you must go outside. Check the air quality tab on this fire's page or airnow.gov for live AQI readings near you.
How far does smoke from a wildfire travel?
Wildfire smoke can travel hundreds to thousands of miles depending on wind patterns and fire size. Smoke from large western U.S. fires has been recorded as far east as the Atlantic coast. At ground level, heavy smoke concentrations are typically within 50–150 miles of the fire, but air quality impacts can extend much further at altitude. Smoke dispersal depends heavily on upper-level wind direction, humidity, and whether the fire is producing a large smoke column. Check the live smoke map for current plume extent.
What is the difference between an evacuation order and an evacuation warning?
An evacuation order means leave immediately — conditions pose an immediate threat to life. You should not wait to gather belongings. An evacuation warning means be ready to leave at a moment's notice; conditions are threatening but not yet at the leave-now stage. Some jurisdictions use a three-tier system adding an "evacuation advisory" as the lowest level (monitor conditions). Zone designations (A, B, C or color-coded) indicate which areas are affected. Always follow the instructions of your local sheriff or fire authority — these designations can change within minutes as fire conditions shift.
How do I find out if my address is in an evacuation zone for the Widemouth 2 Fire?
The most reliable sources are your county sheriff's office, local Office of Emergency Services, or state emergency management agency — they issue and update zone boundaries. Many counties now have online zone-lookup tools where you can type your address, and Genasys Protect (protect.genasys.com) covers much of the West. FireRisk.ai sweeps official evacuation feeds every 5 minutes and paints active zones on this fire's map where coverage exists. The evacuation tab on this fire's status page links to official county sources. If you're in a high-risk area and can't confirm your status, treat any warning as an order and leave.
What should I take if I have to evacuate because of the Widemouth 2 Fire?
Prepare a go-bag in advance with: medications (a week's supply), important documents (ID, insurance cards, passports) or a USB with digital copies, phone charger and backup battery, cash, three days of clothes, water and non-perishable food, a first aid kit, and pet supplies if applicable. If you have time before leaving: take photos of your home and valuables for insurance purposes, close all windows and doors, move outdoor furniture inside, turn off gas, and leave exterior lights on so the home is visible in smoke. Don't wait until the last moment — roads become dangerously congested when orders are issued.
How do I sign up for free wildfire alerts near the Widemouth 2 Fire?
Use the alert signup on this page to receive free email notifications when fires are reported near an address you choose, when Red Flag Warnings are issued for your area, or when a fire you're tracking significantly changes. You can also sign up for your county's emergency alert system (typically Wireless Emergency Alerts plus a county-specific opt-in) and follow your local sheriff on social media. No single source covers everything — use at least two.
Where can I find official updates directly from the Widemouth 2 Fire incident team?
The incident management team publishes daily situation reports and operational updates to InciWeb (inciweb.wildfire.gov) — the official federal wildfire incident information system. Look up the fire by name to find its dedicated incident page with press releases, closure maps, and contact information. Many incident teams also post to a dedicated Facebook page. Your county Office of Emergency Services is the primary source for evacuation and road closure information specific to your community.
How often is the data on this page updated?
The headline figures (acres, containment, personnel) are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed each time this page loads. NIFC data is typically updated once or twice daily by incident agencies — usually in the morning after overnight aerial mapping. The written daily briefing is regenerated automatically every few hours. For the most time-sensitive information during an active incident, check InciWeb and your local county emergency management office, as official reports there often appear before NIFC data is refreshed.
Does homeowners insurance cover wildfire damage?
Standard homeowners insurance (HO-3 policies) typically covers damage from wildfire under the "fire" peril, including the dwelling, other structures, and personal property. However, many insurers have been dropping coverage or non-renewing policies in high-risk California ZIP codes and other wildfire-prone areas. If your insurer dropped you, California's FAIR Plan (and similar state programs in other states) provides basic fire coverage as a last resort. After a wildfire, document all damage with photos before any cleanup, file your claim promptly, and keep receipts for additional living expenses — those are typically covered too. Check the policy's wildfire-specific exclusions and your coverage limits carefully.
How long does it take to fully contain a wildfire?
It depends almost entirely on size, terrain, fuel type, and weather. A small grass fire in flat terrain can be contained in hours. A large fire in steep, rugged terrain with dense chaparral or timber can take weeks or months — the 2020 August Complex in California took over two months and 1 million acres. Dry, windy conditions can undo days of progress overnight. Containment typically accelerates once temperatures drop and humidity rises. After full containment, mop-up operations (extinguishing hot spots, monitoring the perimeter) continue for weeks to prevent re-ignition.
What causes wildfires to spread rapidly?
The "fire triangle" of fuel, heat, and oxygen governs spread, but three conditions drive explosive growth: low relative humidity (below 15% makes fuels extremely receptive), high winds (spread flames ahead of the fire and loft embers — called spotting — that start new ignitions far ahead of the main fire), and steep terrain (fire races uphill because the slope pre-heats fuel above it). A fourth factor is drought-stressed or dead vegetation, which ignites and burns far more intensely than healthy plants. When all four conditions align — a dry spell, strong offshore or downslope wind event, cured grass or chaparral, and a spark — fires can grow from dozens to tens of thousands of acres in a single afternoon.
Widemouth 2 Fire — incident details
- Discovered
- July 27, 2026
- Cause
- Natural
- Primary fuel
- Timber (Litter and Understory)
- Managing organization
- Complex Incident Management Team
- Personnel assigned
- 848
- Estimated cost to date
- $20.2M
- Protecting unit
- UTFIF
- Landowner
- Federal
- Incident ID (IRWIN)
- 2026-UTFIF-260341
Source: National Interagency Fire Center (NIFC) WFIGS feed.
Get Free Alerts When a Wildfire Is Reported Near Your Home
Five seconds now, a head start when it matters: type your email, and we watch this exact address against the same official feeds firefighters use, around the clock. A new fire nearby, dangerous fire weather, a fire turning your way — we email you when official feeds report it. 100% free, unsubscribe anytime.
A fire starts nearby
When official feeds report a new wildfire close to your home.
Dangerous fire weather
Hot, dry, windy days when fires spread fastest (officially called a 'Red Flag Warning').
A nearby fire grows fast
If a fire near you suddenly gets bigger or turns your way.
Any address, 24/7
We watch your exact address around the clock.
Free wildfire alerts — unsubscribe anytime. Next you'll add your home address so alerts are pinpointed to your property.
FireRisk.ai is for awareness only, not emergency alerts. For evacuations, follow local authorities and official emergency alerts. Call 911 for immediate emergencies. Alert Terms
Related
Sources
All figures on this page are sourced directly from official U.S. government and agency feeds. No proprietary or estimated data is used without clear labeling.
- National Interagency Fire Center (NIFC) — WFIGS ↗
Live fire size, containment, personnel, cost, cause, and incident boundaries
- InciWeb — Incident Information System ↗
Official incident management team updates, press releases, and evacuation notices
- National Weather Service (NWS) ↗
Red Flag Warnings, evacuation-level weather alerts, and fire-weather forecasts
- NASA FIRMS — Fire Information for Resource Management ↗
Satellite-detected active fire hotspots (VIIRS/MODIS)
- AirNow / EPA ↗
Air Quality Index (AQI) and smoke concentration near the incident
- Open-Meteo ↗
Fire-weather forecast (temperature, relative humidity, wind gusts) for the incident area
Headline figures are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed and National Weather Service feed; the written briefing is generated automatically and is for awareness only — reported values lag real-time ground conditions. This is not an emergency service or official incident communication. In a wildfire emergency, call 911 and follow your local authorities and evacuation orders. Briefing last generated Mon, 10 Aug 2026 04:01:57 GMT.