Sawmill Fire
Live status for the Sawmill Fire in Iron County, Utah — size, containment, and map from the National Interagency Fire Center.
Size
3,790
acres
Containment
50%
contained
Location
Iron
UT
Started
June 16
2026
Share this alert
Alert your neighbors & friends about the Sawmill Fire
Anyone near this fire should be watching it. Send them this live tracker — every link opens this same up-to-the-minute page so they can see if it’s heading their way.
Live activity
NWS + NASAAutomated activity for this fire’s location, aggregated from official feeds. For human, on-the-ground reporting, also follow Watch Duty.
Simulate a fire spreading toward your home
Enter your address to run the wildfire spread simulator on your own property — using your home’s live wind from the National Weather Service, your terrain slope from USGS, and the real surface fuel around you from LANDFIRE. It illustrates how a wind-driven fire and its embers would tend to move toward a home.
⚠️ Educational illustration — never rely on this for safety
This is not a prediction of the Sawmill Fire’s actual path, spread, or arrival time, and it is not an evacuation tool. It is a simplified physics model that cannot account for real fuels, suppression, spotting, or minute-to-minute weather. Never make any evacuation, safety, or property decision based on this simulation. For real-time fire information and evacuation orders, follow Watch Duty, your county sheriff, and local authorities — and call 911 in an emergency.
Your address is used only to center the model — it isn’t stored.
📍 The map below is centered on the Sawmill Fire’s reported location and shows an educational illustration of how a fire there could spread under current wind. Enter your address above to recenter the model on your home. This is not the fire’s actual perimeter or forecast — see the official map above and Watch Duty for the real fire.
Loading the simulator…
Reminder: this is an educational model centered on the Sawmill Fire’s reported location. Modeled spread times, directions, and ember reach are illustrative ranges only — actual fire behavior depends on fuels, moisture, terrain, structures, and suppression that change constantly. Do not rely on it for any safety or evacuation decision. The live fire location is on the official map above; for real-time information and evacuation orders, follow Watch Duty and local authorities — call 911 in an emergency.
Fire details
Initial location (point of origin)
Open in Maps ↗Decimal degrees
38.11360, -113.81800
Degrees decimal minutes
38° 6.816' N 113° 49.080' W
Degrees minutes seconds
38° 6' 48.96" N 113° 49' 4.80" W
- Discovered
- June 16, 2026
- Cause
- Natural
- Primary fuel
- Dormant Brush, Hardwood Slash
- Managing organization
- Type 4 IC
- Personnel assigned
- 72
- Estimated cost to date
- $4.4M
- Protecting unit
- UTCPD
- Landowner
- Federal
- Incident ID (IRWIN)
- 2026-UTCPD-000225
44 Miles NW from Cedar City, UT
Details from the National Interagency Fire Center (NIFC/IRWIN), updated as crews report. Blank fields haven’t been reported for this incident yet.
Firefighting aircraft over this fire
Live ADS-BAbout the Sawmill Fire
The Sawmill Fire has burned 3,790 acres and is 50% contained in Iron County, Utah, after being reported on June 16, 2026. Cause: natural. Figures come from the National Interagency Fire Center and update as crews report progress — this page refreshes automatically.
For evacuations and real-time updates, follow Watch Duty, your state and local fire authorities, and call 911. This page is for awareness, not emergency guidance.
News coverage of the Sawmill Fire
Live reporting from news outlets, scoped to this fire. We link out to continuously-updated searches rather than reposting articles, so what you see is always current.
Google News — latest ↗
All coverage of the Sawmill Fire
Google News — past 24 hours ↗
Only the most recent reporting
Search the web ↗
Wider results, including official updates
See every fire in the state on the Utah live wildfire tracker →
News links open third-party sites we don’t control. For evacuations and official orders, always follow Watch Duty, your local fire authority, and 911.
Get free wildfire alerts for your area
We’ll email you when a new wildfire is reported near you or the National Weather Service issues a Red Flag Warning for your area. Free, and you can unsubscribe anytime.
Related
Sawmill Fire FAQ
How big is the Sawmill Fire?
As of the latest NIFC report, the Sawmill Fire has burned 3,790 acres and is 50% contained in Iron County, UT. Size and containment change quickly — this page refreshes from the official feed.
Is the Sawmill Fire contained?
The Sawmill Fire is reported at 50% containment. Containment is the percentage of the fire’s perimeter that crews have secured — not how much has burned. Follow your local authority for evacuation status.
How do I get alerts about fires like the Sawmill Fire?
Sign up for free wildfire alerts on this page and we’ll email you when a new fire is reported in your area or a Red Flag Warning is issued.
Data: National Interagency Fire Center (NIFC), refreshed periodically. Wildfire conditions change rapidly; figures here may lag official updates. FireRisk.ai is for awareness, not emergency guidance.