Sycamore Fire — Latest News & Live Update
Gila County, AZ
FireRisk.ai · Updated July 11, 2026
✅ Containment up 9% — firefighters have secured more of the perimeter, meaning less of the fire edge can spread freely.
The Sycamore Fire in Gila County, Arizona, reached full containment on July 11, advancing 9 percentage points since the previous report. The fire, discovered June 15, burned 11,939 acres across short-grass fuel and is no longer spreading.
Crews held the fire's perimeter with 12 personnel assigned under Type 5 incident command. The natural-cause fire stopped growing as containment tightened from 91 percent to 100 percent, indicating the suppression effort has successfully boxed in all active edges. No new acreage was recorded in this reporting period.
The Sycamore Fire is now fully contained and controlled. All suppression objectives have been met, and the incident is transitioning to mop-up and resource demobilization. The total cost to extinguish and manage the fire stands at $12,729,031. Follow local authorities and official orders for any remaining evacuation or area-access updates.
FireRisk.ai covers active wildfire incidents and home fire risk using official NIFC, National Weather Service, and NASA FIRMS data. Briefings are generated automatically from verified official feeds and reviewed for accuracy.
Update timeline
The Sycamore Fire in Gila County, Arizona, reached full containment on July 11, advancing 9 percentage points since the previous report. The fire, discovered June 15, burned 11,939 acres across short-grass fuel and is no longer spreading.
The Sycamore Fire in Gila County, Arizona, has held steady at 11,939 acres with containment at 91 percent, showing no growth or loss of ground since the last report. Discovered naturally on June 15, the fire has burned through short grass fueling its spread across what is now near-complete containment lines. A Type 4 Incident Commander is managing the fire with 15 personnel assigned to suppression and mop-up operations.
The Sycamore Fire in Gila County, Arizona, remains at 91% containment as of July 9, holding steady at 11,939 acres since the previous report. The fire, which started naturally on June 15, has now burned for nearly four weeks under the management of a Type 4 Incident Commander and a crew of 16 personnel assigned to suppression operations.
The Sycamore Fire in Gila County, Arizona, has held steady at 11,939 acres with no growth or containment gains reported since the last update. Discovered on June 15, containment stands at 91 percent, indicating crews have secured most of the perimeter and are in the final stages of mop-up operations. The fire is burning through short grass fuel, which typically carries lower risk than heavier timber or brush once lines are established.
The Sycamore Fire in Gila County, Arizona, remains nearly contained at 91 percent as crews hold steady on a perimeter that has not expanded since the last report. The fire, which started naturally on June 15, has burned 11,939 acres and is now in the final stages of suppression under a Type 4 Incident Commander.
The Sycamore Fire in Gila County, Arizona, remains nearly contained at 91 percent as of July 6, with no acreage growth or containment change since the last report. The fire, which started naturally on June 15, has burned 11,939 acres and is being managed by a Type 4 Incident Commander with 48 personnel assigned to the perimeter.
The Sycamore Fire in Gila County, Arizona, remains stable at 11,939 acres with containment holding at 91 percent, according to the latest interagency report. The fire, which ignited naturally on June 15, has shown no growth since the previous update, and crews have made no additional containment gains in recent days. At this containment level, suppression efforts have moved into the final holding and mop-up phase, with crews working to secure the remaining perimeter and eliminate any remaining interior hot spots.
The Sycamore Fire near Gila County, Arizona, remained essentially static through July 4, holding at 11,939 acres and 91 percent containment—a sign that crews have moved into the final, slower phase of suppression. The fire was discovered on June 15 and has burned through short grass fuels averaging one foot in height. With 71 personnel assigned to the incident, firefighters have been working to seal the remaining perimeter since the last update on June 18.
Latest news — Sycamore Fire
Auto-updating
News links open third-party sites. For official evacuation orders follow your local fire authority and 911.
Sycamore Fire — current status questions
Is the Sycamore Fire contained?
As of July 11, 2026, the Sycamore Fire is 100% contained in Gila County, AZ. Containment means that percentage of the fire's perimeter has been secured by crews — the fire can still burn inside those lines. The fire is nearing control, though full containment and mop-up operations continue. Follow your local fire authority for evacuation status.
How big is the Sycamore Fire?
As of July 11, 2026, the Sycamore Fire has burned 11,939 acres in Gila County, AZ. Wildfire acreage is the estimated total area inside the fire perimeter — it is updated as aerial and ground crews assess the boundary and changes frequently on active fires. One acre is roughly the size of a football field; 18.7 square miles.
When did the Sycamore Fire start?
The Sycamore Fire was first reported on June 15, 2026 (25 days ago) in Gila County, AZ. The reported cause is natural. The fire's discovery date is reported by the incident agency to the National Interagency Fire Center (NIFC).
What caused the Sycamore Fire?
According to NIFC reporting, the Sycamore Fire was caused by natural. Cause determinations are made by trained fire investigators and may be updated as the investigation proceeds.
How many firefighters are working on the Sycamore Fire?
As of July 11, 2026, 12 total personnel are assigned to the Sycamore Fire according to NIFC. This figure includes all positions on the incident — engine crews, hand crews, dozers, aircraft, logistics, and incident management team members. Large fires typically involve resources from multiple agencies and can draw crews from across the country when local resources are stretched.
How much has the Sycamore Fire cost so far?
The estimated cost to suppress the Sycamore Fire is $12.7 million as of July 11, 2026, according to NIFC. Wildfire suppression costs include personnel, equipment, aircraft, and logistical support. Large fires often cost millions of dollars per day at peak operations, and total costs continue to accumulate until the fire is fully contained and crews demobilize.
Who is managing the Sycamore Fire response?
The Sycamore Fire is being managed by Type 5 IC. Wildfire incident management teams (IMTs) are classified by complexity (Type 1 being the most complex). They coordinate all suppression resources — crews, aircraft, equipment — and produce the official daily situation reports posted to InciWeb.
Wildfire questions — Sycamore Fire area
Answers apply to all active wildfires; specifics use Sycamore Fire data where available.
What does the containment percentage mean for the Sycamore Fire?
Containment percentage is the share of the fire's perimeter that crews have physically secured — typically by cutting a firebreak or reaching a natural barrier like a road or river. A fire at 40% contained means 40% of the edge has a line that crews are confident will hold; the remaining 60% is still open. The fire can continue burning inside those lines even at high containment. Full containment (100%) means the entire perimeter is secured, though the fire may still smolder inside for weeks during mop-up.
How is wildfire acreage measured?
Wildfire acreage is the estimated total area enclosed within the fire's perimeter, not just the actively burning area. Crews and aircraft sketch the perimeter using GPS tracks, aerial infrared flights (typically flown at night), and satellite imagery. Because mapping lags the actual fire edge by hours to days, reported acreage is always an estimate — especially on a fast-moving fire. One square mile equals 640 acres; compare the acreage figure to the map perimeter for a sense of scale.
Is the smoke from the Sycamore Fire dangerous to breathe?
Wildfire smoke contains fine particles (PM2.5), carbon monoxide, and other compounds that are harmful to breathe — especially for children, the elderly, pregnant women, and anyone with heart or lung conditions. When AQI (Air Quality Index) is in the "Unhealthy" range (151+), everyone should reduce outdoor activity. At "Very Unhealthy" (201+), stay indoors with windows closed, run an air purifier if you have one, and wear an N95 or KN95 mask if you must go outside. Check the air quality tab on this fire's page or airnow.gov for live AQI readings near you.
How far does smoke from a wildfire travel?
Wildfire smoke can travel hundreds to thousands of miles depending on wind patterns and fire size. Smoke from large western U.S. fires has been recorded as far east as the Atlantic coast. At ground level, heavy smoke concentrations are typically within 50–150 miles of the fire, but air quality impacts can extend much further at altitude. Smoke dispersal depends heavily on upper-level wind direction, humidity, and whether the fire is producing a large smoke column. Check the live smoke map for current plume extent.
What is the difference between an evacuation order and an evacuation warning?
An evacuation order means leave immediately — conditions pose an immediate threat to life. You should not wait to gather belongings. An evacuation warning means be ready to leave at a moment's notice; conditions are threatening but not yet at the leave-now stage. Some jurisdictions use a three-tier system adding an "evacuation advisory" as the lowest level (monitor conditions). Zone designations (A, B, C or color-coded) indicate which areas are affected. Always follow the instructions of your local sheriff or fire authority — these designations can change within minutes as fire conditions shift.
How do I find out if my address is in an evacuation zone for the Sycamore Fire?
The most reliable sources are your county sheriff's office, local Office of Emergency Services, or state emergency management agency — they issue and update zone boundaries. Many counties now have online zone-lookup tools where you can type your address, and Genasys Protect (protect.genasys.com) covers much of the West. FireRisk.ai sweeps official evacuation feeds every 5 minutes and paints active zones on this fire's map where coverage exists. The evacuation tab on this fire's status page links to official county sources. If you're in a high-risk area and can't confirm your status, treat any warning as an order and leave.
What should I take if I have to evacuate because of the Sycamore Fire?
Prepare a go-bag in advance with: medications (a week's supply), important documents (ID, insurance cards, passports) or a USB with digital copies, phone charger and backup battery, cash, three days of clothes, water and non-perishable food, a first aid kit, and pet supplies if applicable. If you have time before leaving: take photos of your home and valuables for insurance purposes, close all windows and doors, move outdoor furniture inside, turn off gas, and leave exterior lights on so the home is visible in smoke. Don't wait until the last moment — roads become dangerously congested when orders are issued.
How do I sign up for free wildfire alerts near the Sycamore Fire?
Use the alert signup on this page to receive free email notifications when fires are reported near an address you choose, when Red Flag Warnings are issued for your area, or when a fire you're tracking significantly changes. You can also sign up for your county's emergency alert system (typically Wireless Emergency Alerts plus a county-specific opt-in) and follow your local sheriff on social media. No single source covers everything — use at least two.
Where can I find official updates directly from the Sycamore Fire incident team?
The incident management team publishes daily situation reports and operational updates to InciWeb (inciweb.wildfire.gov) — the official federal wildfire incident information system. Look up the fire by name to find its dedicated incident page with press releases, closure maps, and contact information. Many incident teams also post to a dedicated Facebook page. Your county Office of Emergency Services is the primary source for evacuation and road closure information specific to your community.
How often is the data on this page updated?
The headline figures (acres, containment, personnel) are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed each time this page loads. NIFC data is typically updated once or twice daily by incident agencies — usually in the morning after overnight aerial mapping. The written daily briefing is regenerated automatically every few hours. For the most time-sensitive information during an active incident, check InciWeb and your local county emergency management office, as official reports there often appear before NIFC data is refreshed.
Does homeowners insurance cover wildfire damage?
Standard homeowners insurance (HO-3 policies) typically covers damage from wildfire under the "fire" peril, including the dwelling, other structures, and personal property. However, many insurers have been dropping coverage or non-renewing policies in high-risk California ZIP codes and other wildfire-prone areas. If your insurer dropped you, California's FAIR Plan (and similar state programs in other states) provides basic fire coverage as a last resort. After a wildfire, document all damage with photos before any cleanup, file your claim promptly, and keep receipts for additional living expenses — those are typically covered too. Check the policy's wildfire-specific exclusions and your coverage limits carefully.
How long does it take to fully contain a wildfire?
It depends almost entirely on size, terrain, fuel type, and weather. A small grass fire in flat terrain can be contained in hours. A large fire in steep, rugged terrain with dense chaparral or timber can take weeks or months — the 2020 August Complex in California took over two months and 1 million acres. Dry, windy conditions can undo days of progress overnight. Containment typically accelerates once temperatures drop and humidity rises. After full containment, mop-up operations (extinguishing hot spots, monitoring the perimeter) continue for weeks to prevent re-ignition.
What causes wildfires to spread rapidly?
The "fire triangle" of fuel, heat, and oxygen governs spread, but three conditions drive explosive growth: low relative humidity (below 15% makes fuels extremely receptive), high winds (spread flames ahead of the fire and loft embers — called spotting — that start new ignitions far ahead of the main fire), and steep terrain (fire races uphill because the slope pre-heats fuel above it). A fourth factor is drought-stressed or dead vegetation, which ignites and burns far more intensely than healthy plants. When all four conditions align — a dry spell, strong offshore or downslope wind event, cured grass or chaparral, and a spark — fires can grow from dozens to tens of thousands of acres in a single afternoon.
Sycamore Fire — incident details
- Discovered
- June 15, 2026
- Cause
- Natural
- Personnel assigned
- 12
- Estimated cost to date
- $12.7M
Source: National Interagency Fire Center (NIFC) WFIGS feed.
Get Free Alerts When a Wildfire Is Reported Near Your Home
Five seconds now, a head start when it matters: type your email, and we watch this exact address against the same official feeds firefighters use, around the clock. A new fire nearby, dangerous fire weather, a fire turning your way — we email you when official feeds report it. 100% free, unsubscribe anytime.
A fire starts nearby
When official feeds report a new wildfire close to your home.
Dangerous fire weather
Hot, dry, windy days when fires spread fastest (officially called a 'Red Flag Warning').
A nearby fire grows fast
If a fire near you suddenly gets bigger or turns your way.
Any address, 24/7
We watch your exact address around the clock.
Free wildfire alerts — unsubscribe anytime. Next you'll add your home address so alerts are pinpointed to your property.
FireRisk.ai is for awareness only, not emergency alerts. For evacuations, follow local authorities and official emergency alerts. Call 911 for immediate emergencies. Alert Terms
Related
Sources
All figures on this page are sourced directly from official U.S. government and agency feeds. No proprietary or estimated data is used without clear labeling.
- National Interagency Fire Center (NIFC) — WFIGS ↗
Live fire size, containment, personnel, cost, cause, and incident boundaries
- InciWeb — Incident Information System ↗
Official incident management team updates, press releases, and evacuation notices
- National Weather Service (NWS) ↗
Red Flag Warnings, evacuation-level weather alerts, and fire-weather forecasts
- NASA FIRMS — Fire Information for Resource Management ↗
Satellite-detected active fire hotspots (VIIRS/MODIS)
- AirNow / EPA ↗
Air Quality Index (AQI) and smoke concentration near the incident
- Open-Meteo ↗
Fire-weather forecast (temperature, relative humidity, wind gusts) for the incident area
Headline figures are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed and National Weather Service feed; the written briefing is generated automatically and is for awareness only — reported values lag real-time ground conditions. This is not an emergency service or official incident communication. In a wildfire emergency, call 911 and follow your local authorities and evacuation orders. Briefing last generated Sat, 11 Jul 2026 02:00:59 GMT.