BISCAR Fire — Latest News & Live Update
Lassen County, CA
FireRisk.ai · Updated August 2, 2026
✅ Containment up 1% — firefighters have secured more of the perimeter, meaning less of the fire edge can spread freely.
The BISCAR Fire in Lassen County, California, has reached near-total containment as suppression operations near completion. The fire, which was discovered on July 18, held steady at 69,352 acres with 99 percent contained as of August 1, showing no additional growth or containment gains since the previous report.
The fire has burned primarily through brush fuel two feet in height. Ninety-four personnel remain assigned to the incident under a Type 4 Incident Commander. With containment at 99 percent, crews have effectively held and secured the perimeter across the vast majority of the fire's edge, limiting active fire spread to minimal or residual pockets. The cause remains undetermined pending investigation.
The BISCAR Fire is now in the final stages of control, with suppression efforts focused on mop-up and line security. At this containment level, the fire is expected to transition fully to patrol and monitoring as extinguishment efforts conclude. The incident has cost an estimated $10 million to date. Residents should continue to follow all local authority orders and evacuation guidance.
FireRisk.ai covers active wildfire incidents and home fire risk using official NIFC, National Weather Service, and NASA FIRMS data. Briefings are generated automatically from verified official feeds and reviewed for accuracy.
Update timeline
The BISCAR Fire in Lassen County, California, has reached near-total containment as suppression operations near completion. The fire, which was discovered on July 18, held steady at 69,352 acres with 99 percent contained as of August 1, showing no additional growth or containment gains since the previous report.
The BISCAR Fire in Lassen County, California, has reached near-total containment as suppression operations near completion. The fire, which was discovered on July 18, held steady at 69,352 acres with 99 percent contained as of August 1, showing no additional growth or containment gains since the previous report.
The Biscar Fire in Lassen County has reached 98 percent containment as of July 31, holding steady at 69,352 acres with no new growth since the previous report. Discovered on July 18 in brush fuel averaging 2 feet in height, the fire has been managed by a Type 3 Incident Commander with 96 personnel assigned across the perimeter. The cause remains undetermined.
The BISCAR Fire in Lassen County, California, remains nearly contained after burning 69,352 acres since its discovery on July 18. With containment holding steady at 98 percent and no additional acreage burned in the latest reporting period, the fire is in its final suppression phase as crews work to secure the remaining perimeter.
The BISCAR Fire in Lassen County, California, remains at 98 percent containment as of July 29, holding steady at 69,352 acres with no growth or containment change reported in the latest period. Discovered on July 18, the fire has burned through brush fuel averaging 2 feet in height across its footprint. The cause remains undetermined.
The BISCAR Fire in Lassen County has held steady at 69,352 acres with containment at 97 percent as of July 28, marking ten days without growth since its discovery on July 18. The fire remains nearly contained, with crews holding and extending perimeter lines across virtually the entire burn boundary.
The Biscar Fire in Lassen County has held steady at 69,352 acres with containment at 92 percent as of July 27, nine days after its discovery on July 18. Crews have stopped forward progress across the fire's perimeter, a critical threshold in the suppression effort. The cause remains undetermined.
The BISCAR Fire in Lassen County remained at 69,355 acres with no growth recorded since the last report, as containment held steady at 89 percent. Discovered on July 18, the fire has consumed more than 69,000 acres of brushland in the two weeks since ignition, with the cause still undetermined by investigators.
Latest news — BISCAR Fire
Auto-updating
News links open third-party sites. For official evacuation orders follow your local fire authority and 911.
BISCAR Fire — current status questions
Is the BISCAR Fire contained?
As of August 1, 2026, the BISCAR Fire is 99% contained in Lassen County, CA. Containment means that percentage of the fire's perimeter has been secured by crews — the fire can still burn inside those lines. The fire is nearing control, though full containment and mop-up operations continue. Follow your local fire authority for evacuation status.
How big is the BISCAR Fire?
As of August 1, 2026, the BISCAR Fire has burned 69,352 acres in Lassen County, CA. Wildfire acreage is the estimated total area inside the fire perimeter — it is updated as aerial and ground crews assess the boundary and changes frequently on active fires. One acre is roughly the size of a football field; 108.4 square miles.
When did the BISCAR Fire start?
The BISCAR Fire was first reported on July 18, 2026 (14 days ago) in Lassen County, CA. The cause is still under investigation. The fire's discovery date is reported by the incident agency to the National Interagency Fire Center (NIFC).
What caused the BISCAR Fire?
The cause of the BISCAR Fire is currently under investigation. Fire investigators from the responsible agency examine evidence at the point of origin before releasing a determination. This process can take days to weeks after a fire is reported. Check official incident channels for updates.
How many firefighters are working on the BISCAR Fire?
As of August 1, 2026, 94 total personnel are assigned to the BISCAR Fire according to NIFC. This figure includes all positions on the incident — engine crews, hand crews, dozers, aircraft, logistics, and incident management team members. Large fires typically involve resources from multiple agencies and can draw crews from across the country when local resources are stretched.
How much has the BISCAR Fire cost so far?
The estimated cost to suppress the BISCAR Fire is $10.0 million as of August 1, 2026, according to NIFC. Wildfire suppression costs include personnel, equipment, aircraft, and logistical support. Large fires often cost millions of dollars per day at peak operations, and total costs continue to accumulate until the fire is fully contained and crews demobilize.
Who is managing the BISCAR Fire response?
The BISCAR Fire is being managed by Type 4 IC. Wildfire incident management teams (IMTs) are classified by complexity (Type 1 being the most complex). They coordinate all suppression resources — crews, aircraft, equipment — and produce the official daily situation reports posted to InciWeb.
Wildfire questions — BISCAR Fire area
Answers apply to all active wildfires; specifics use BISCAR Fire data where available.
What does the containment percentage mean for the BISCAR Fire?
Containment percentage is the share of the fire's perimeter that crews have physically secured — typically by cutting a firebreak or reaching a natural barrier like a road or river. A fire at 40% contained means 40% of the edge has a line that crews are confident will hold; the remaining 60% is still open. The fire can continue burning inside those lines even at high containment. Full containment (100%) means the entire perimeter is secured, though the fire may still smolder inside for weeks during mop-up.
How is wildfire acreage measured?
Wildfire acreage is the estimated total area enclosed within the fire's perimeter, not just the actively burning area. Crews and aircraft sketch the perimeter using GPS tracks, aerial infrared flights (typically flown at night), and satellite imagery. Because mapping lags the actual fire edge by hours to days, reported acreage is always an estimate — especially on a fast-moving fire. One square mile equals 640 acres; compare the acreage figure to the map perimeter for a sense of scale.
Is the smoke from the BISCAR Fire dangerous to breathe?
Wildfire smoke contains fine particles (PM2.5), carbon monoxide, and other compounds that are harmful to breathe — especially for children, the elderly, pregnant women, and anyone with heart or lung conditions. When AQI (Air Quality Index) is in the "Unhealthy" range (151+), everyone should reduce outdoor activity. At "Very Unhealthy" (201+), stay indoors with windows closed, run an air purifier if you have one, and wear an N95 or KN95 mask if you must go outside. Check the air quality tab on this fire's page or airnow.gov for live AQI readings near you.
How far does smoke from a wildfire travel?
Wildfire smoke can travel hundreds to thousands of miles depending on wind patterns and fire size. Smoke from large western U.S. fires has been recorded as far east as the Atlantic coast. At ground level, heavy smoke concentrations are typically within 50–150 miles of the fire, but air quality impacts can extend much further at altitude. Smoke dispersal depends heavily on upper-level wind direction, humidity, and whether the fire is producing a large smoke column. Check the live smoke map for current plume extent.
What is the difference between an evacuation order and an evacuation warning?
An evacuation order means leave immediately — conditions pose an immediate threat to life. You should not wait to gather belongings. An evacuation warning means be ready to leave at a moment's notice; conditions are threatening but not yet at the leave-now stage. Some jurisdictions use a three-tier system adding an "evacuation advisory" as the lowest level (monitor conditions). Zone designations (A, B, C or color-coded) indicate which areas are affected. Always follow the instructions of your local sheriff or fire authority — these designations can change within minutes as fire conditions shift.
How do I find out if my address is in an evacuation zone for the BISCAR Fire?
The most reliable sources are your county sheriff's office, local Office of Emergency Services, or state emergency management agency — they issue and update zone boundaries. Many counties now have online zone-lookup tools where you can type your address, and Genasys Protect (protect.genasys.com) covers much of the West. FireRisk.ai sweeps official evacuation feeds every 5 minutes and paints active zones on this fire's map where coverage exists. The evacuation tab on this fire's status page links to official county sources. If you're in a high-risk area and can't confirm your status, treat any warning as an order and leave.
What should I take if I have to evacuate because of the BISCAR Fire?
Prepare a go-bag in advance with: medications (a week's supply), important documents (ID, insurance cards, passports) or a USB with digital copies, phone charger and backup battery, cash, three days of clothes, water and non-perishable food, a first aid kit, and pet supplies if applicable. If you have time before leaving: take photos of your home and valuables for insurance purposes, close all windows and doors, move outdoor furniture inside, turn off gas, and leave exterior lights on so the home is visible in smoke. Don't wait until the last moment — roads become dangerously congested when orders are issued.
How do I sign up for free wildfire alerts near the BISCAR Fire?
Use the alert signup on this page to receive free email notifications when fires are reported near an address you choose, when Red Flag Warnings are issued for your area, or when a fire you're tracking significantly changes. You can also sign up for your county's emergency alert system (typically Wireless Emergency Alerts plus a county-specific opt-in) and follow your local sheriff on social media. No single source covers everything — use at least two.
Where can I find official updates directly from the BISCAR Fire incident team?
The incident management team publishes daily situation reports and operational updates to InciWeb (inciweb.wildfire.gov) — the official federal wildfire incident information system. Look up the fire by name to find its dedicated incident page with press releases, closure maps, and contact information. Many incident teams also post to a dedicated Facebook page. Your county Office of Emergency Services is the primary source for evacuation and road closure information specific to your community.
How often is the data on this page updated?
The headline figures (acres, containment, personnel) are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed each time this page loads. NIFC data is typically updated once or twice daily by incident agencies — usually in the morning after overnight aerial mapping. The written daily briefing is regenerated automatically every few hours. For the most time-sensitive information during an active incident, check InciWeb and your local county emergency management office, as official reports there often appear before NIFC data is refreshed.
Does homeowners insurance cover wildfire damage?
Standard homeowners insurance (HO-3 policies) typically covers damage from wildfire under the "fire" peril, including the dwelling, other structures, and personal property. However, many insurers have been dropping coverage or non-renewing policies in high-risk California ZIP codes and other wildfire-prone areas. If your insurer dropped you, California's FAIR Plan (and similar state programs in other states) provides basic fire coverage as a last resort. After a wildfire, document all damage with photos before any cleanup, file your claim promptly, and keep receipts for additional living expenses — those are typically covered too. Check the policy's wildfire-specific exclusions and your coverage limits carefully.
How long does it take to fully contain a wildfire?
It depends almost entirely on size, terrain, fuel type, and weather. A small grass fire in flat terrain can be contained in hours. A large fire in steep, rugged terrain with dense chaparral or timber can take weeks or months — the 2020 August Complex in California took over two months and 1 million acres. Dry, windy conditions can undo days of progress overnight. Containment typically accelerates once temperatures drop and humidity rises. After full containment, mop-up operations (extinguishing hot spots, monitoring the perimeter) continue for weeks to prevent re-ignition.
What causes wildfires to spread rapidly?
The "fire triangle" of fuel, heat, and oxygen governs spread, but three conditions drive explosive growth: low relative humidity (below 15% makes fuels extremely receptive), high winds (spread flames ahead of the fire and loft embers — called spotting — that start new ignitions far ahead of the main fire), and steep terrain (fire races uphill because the slope pre-heats fuel above it). A fourth factor is drought-stressed or dead vegetation, which ignites and burns far more intensely than healthy plants. When all four conditions align — a dry spell, strong offshore or downslope wind event, cured grass or chaparral, and a spark — fires can grow from dozens to tens of thousands of acres in a single afternoon.
BISCAR Fire — incident details
- Discovered
- July 18, 2026
- Cause
- Undetermined
- Personnel assigned
- 94
- Estimated cost to date
- $10.0M
Source: National Interagency Fire Center (NIFC) WFIGS feed.
Get Free Alerts When a Wildfire Is Reported Near Your Home
Five seconds now, a head start when it matters: type your email, and we watch this exact address against the same official feeds firefighters use, around the clock. A new fire nearby, dangerous fire weather, a fire turning your way — we email you when official feeds report it. 100% free, unsubscribe anytime.
You’re signed up for free alerts. Here’s exactly what they cover:
A fire starts nearby
We'll email you the moment official feeds report a new wildfire close to your home.
Dangerous fire weather
We'll email you on hot, dry, windy days when fires spread fastest (officially called a 'Red Flag Warning').
A nearby fire grows fast
We'll email you if a fire near you suddenly gets bigger or turns your way.
Any address, 24/7
We're watching your exact address around the clock, starting now.
Free wildfire alerts — unsubscribe anytime. Next you’ll add your home address so alerts are pinpointed to your property.
FireRisk.ai is for awareness only, not emergency alerts. For evacuations, follow local authorities and official emergency alerts. Call 911 for immediate emergencies. Alert Terms
Related
Sources
All figures on this page are sourced directly from official U.S. government and agency feeds. No proprietary or estimated data is used without clear labeling.
- National Interagency Fire Center (NIFC) — WFIGS ↗
Live fire size, containment, personnel, cost, cause, and incident boundaries
- InciWeb — Incident Information System ↗
Official incident management team updates, press releases, and evacuation notices
- National Weather Service (NWS) ↗
Red Flag Warnings, evacuation-level weather alerts, and fire-weather forecasts
- NASA FIRMS — Fire Information for Resource Management ↗
Satellite-detected active fire hotspots (VIIRS/MODIS)
- AirNow / EPA ↗
Air Quality Index (AQI) and smoke concentration near the incident
- Open-Meteo ↗
Fire-weather forecast (temperature, relative humidity, wind gusts) for the incident area
Headline figures are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed and National Weather Service feed; the written briefing is generated automatically and is for awareness only — reported values lag real-time ground conditions. This is not an emergency service or official incident communication. In a wildfire emergency, call 911 and follow your local authorities and evacuation orders. Briefing last generated Sun, 02 Aug 2026 02:01:04 GMT.