Babylon Fire — Latest News & Live Update
San Juan County, UT
FireRisk.ai · Updated August 13, 2026
✅ Containment up 3% — firefighters have secured more of the perimeter, meaning less of the fire edge can spread freely.
The Babylon Fire in San Juan County, Utah, reached full containment on August 13, marking the end of a nearly seven-week campaign across 107,189 acres. The fire was discovered June 26 and burned primarily through timber litter and understory fuels. Containment advanced 3 percentage points since the last report to reach 100 percent, signaling the final phase of suppression operations.
The fire's cause remains undetermined. At its peak, crews held the perimeter using 62 personnel assigned through a Type 3 Incident Commander. The containment trend shows crews have gained control across the entire fire boundary, transitioning from active suppression to mop-up and recovery work. No additional acreage was added since the previous report.
The Babylon Fire is now fully contained with no growth expected. Suppression costs have reached $62.8 million to date. Follow local authorities and official orders regarding any remaining area restrictions or safety advisories.
FireRisk.ai covers active wildfire incidents and home fire risk using official NIFC, National Weather Service, and NASA FIRMS data. Briefings are generated automatically from verified official feeds and reviewed for accuracy.
Update timeline
The Babylon Fire in San Juan County, Utah, reached full containment on August 13, marking the end of a nearly seven-week campaign across 107,189 acres. The fire was discovered June 26 and burned primarily through timber litter and understory fuels. Containment advanced 3 percentage points since the last report to reach 100 percent, signaling the final phase of suppression operations.
The Babylon Fire in San Juan County, Utah, has reached final containment. The fire, which burned 107,189 acres since its discovery on June 26, now stands at 97% containment with no change in size or containment progress reported in the latest update. Sixty-five personnel remain assigned to the incident under Type 3 incident command.
The Babylon Fire in San Juan County, Utah, remains nearly contained after more than a month of suppression efforts. The fire holds at 97 percent containment across its 107,189-acre footprint, with no growth reported since the last update and no change in containment progress. Discovered on June 26, the fire has burned through timber litter and understory fuel, and its cause remains undetermined.
The Babylon Fire in San Juan County, Utah, remains nearly fully contained as crews work toward complete suppression of the 107,189-acre burn, which has not grown in size since the last report. Discovered on June 26, the fire spread across timber-heavy terrain with litter and understory fuel before containment efforts brought it to 97 percent held—a threshold indicating the suppression lines are in the final stages of control with minimal active fire remaining on the perimeter.
The Babylon Fire in San Juan County, Utah, remains virtually static as containment holds at 97% with no new acreage growth since the last report. The fire, which was discovered on June 26, has burned 107,189 acres and shows no signs of active expansion despite the timber litter and understory fuels across its footprint.
The Babylon Fire in San Juan County, Utah, remained static on August 8, holding at 107,189 acres with containment at 97 percent. The blaze, discovered June 26, has burned through timber litter and understory fuel across more than two months of suppression effort. With 97 percent containment, crews have secured the perimeter and are in the final stages of mop-up and patrol operations.
The Babylon Fire in San Juan County, Utah, has held steady at 107,189 acres with containment locked at 97 percent, showing no growth or progress since the last report. Discovered on June 26, a Type 3 Incident Commander is managing the firefighting response with 53 personnel assigned to the perimeter. The fire's spread through timber litter and understory has been largely arrested, leaving crews in the final phase of securing the remaining 3 percent of the fire's edge and mopping up interior hot spots.
The Babylon Fire in San Juan County, Utah, remains largely controlled as suppression efforts enter their final phase. The fire, which was discovered on June 26, holds steady at 107,189 acres with 95 percent containment, showing no change in either size or containment progress since the last report. At this containment level, crews have secured the perimeter across nearly all sectors and are focused on mopping up remaining hot spots and reinforcing existing lines.
Latest news — Babylon Fire
Auto-updating
News links open third-party sites. For official evacuation orders follow your local fire authority and 911.
Babylon Fire — current status questions
Is the Babylon Fire contained?
As of August 13, 2026, the Babylon Fire is 100% contained in San Juan County, UT. Containment means that percentage of the fire's perimeter has been secured by crews — the fire can still burn inside those lines. The fire is nearing control, though full containment and mop-up operations continue. Follow your local fire authority for evacuation status.
How big is the Babylon Fire?
As of August 13, 2026, the Babylon Fire has burned 107,189 acres in San Juan County, UT. Wildfire acreage is the estimated total area inside the fire perimeter — it is updated as aerial and ground crews assess the boundary and changes frequently on active fires. One acre is roughly the size of a football field; 167.5 square miles.
When did the Babylon Fire start?
The Babylon Fire was first reported on June 26, 2026 in San Juan County, UT. The cause is still under investigation. The fire's discovery date is reported by the incident agency to the National Interagency Fire Center (NIFC).
What caused the Babylon Fire?
The cause of the Babylon Fire is currently under investigation. Fire investigators from the responsible agency examine evidence at the point of origin before releasing a determination. This process can take days to weeks after a fire is reported. Check official incident channels for updates.
How many firefighters are working on the Babylon Fire?
As of August 13, 2026, 62 total personnel are assigned to the Babylon Fire according to NIFC. This figure includes all positions on the incident — engine crews, hand crews, dozers, aircraft, logistics, and incident management team members. Large fires typically involve resources from multiple agencies and can draw crews from across the country when local resources are stretched.
How much has the Babylon Fire cost so far?
The estimated cost to suppress the Babylon Fire is $62.8 million as of August 13, 2026, according to NIFC. Wildfire suppression costs include personnel, equipment, aircraft, and logistical support. Large fires often cost millions of dollars per day at peak operations, and total costs continue to accumulate until the fire is fully contained and crews demobilize.
Who is managing the Babylon Fire response?
The Babylon Fire is being managed by Type 3 IC. Wildfire incident management teams (IMTs) are classified by complexity (Type 1 being the most complex). They coordinate all suppression resources — crews, aircraft, equipment — and produce the official daily situation reports posted to InciWeb.
Wildfire questions — Babylon Fire area
Answers apply to all active wildfires; specifics use Babylon Fire data where available.
What does the containment percentage mean for the Babylon Fire?
Containment percentage is the share of the fire's perimeter that crews have physically secured — typically by cutting a firebreak or reaching a natural barrier like a road or river. A fire at 40% contained means 40% of the edge has a line that crews are confident will hold; the remaining 60% is still open. The fire can continue burning inside those lines even at high containment. Full containment (100%) means the entire perimeter is secured, though the fire may still smolder inside for weeks during mop-up.
How is wildfire acreage measured?
Wildfire acreage is the estimated total area enclosed within the fire's perimeter, not just the actively burning area. Crews and aircraft sketch the perimeter using GPS tracks, aerial infrared flights (typically flown at night), and satellite imagery. Because mapping lags the actual fire edge by hours to days, reported acreage is always an estimate — especially on a fast-moving fire. One square mile equals 640 acres; compare the acreage figure to the map perimeter for a sense of scale.
Is the smoke from the Babylon Fire dangerous to breathe?
Wildfire smoke contains fine particles (PM2.5), carbon monoxide, and other compounds that are harmful to breathe — especially for children, the elderly, pregnant women, and anyone with heart or lung conditions. When AQI (Air Quality Index) is in the "Unhealthy" range (151+), everyone should reduce outdoor activity. At "Very Unhealthy" (201+), stay indoors with windows closed, run an air purifier if you have one, and wear an N95 or KN95 mask if you must go outside. Check the air quality tab on this fire's page or airnow.gov for live AQI readings near you.
How far does smoke from a wildfire travel?
Wildfire smoke can travel hundreds to thousands of miles depending on wind patterns and fire size. Smoke from large western U.S. fires has been recorded as far east as the Atlantic coast. At ground level, heavy smoke concentrations are typically within 50–150 miles of the fire, but air quality impacts can extend much further at altitude. Smoke dispersal depends heavily on upper-level wind direction, humidity, and whether the fire is producing a large smoke column. Check the live smoke map for current plume extent.
What is the difference between an evacuation order and an evacuation warning?
An evacuation order means leave immediately — conditions pose an immediate threat to life. You should not wait to gather belongings. An evacuation warning means be ready to leave at a moment's notice; conditions are threatening but not yet at the leave-now stage. Some jurisdictions use a three-tier system adding an "evacuation advisory" as the lowest level (monitor conditions). Zone designations (A, B, C or color-coded) indicate which areas are affected. Always follow the instructions of your local sheriff or fire authority — these designations can change within minutes as fire conditions shift.
How do I find out if my address is in an evacuation zone for the Babylon Fire?
The most reliable sources are your county sheriff's office, local Office of Emergency Services, or state emergency management agency — they issue and update zone boundaries. Many counties now have online zone-lookup tools where you can type your address, and Genasys Protect (protect.genasys.com) covers much of the West. FireRisk.ai sweeps official evacuation feeds every 5 minutes and paints active zones on this fire's map where coverage exists. The evacuation tab on this fire's status page links to official county sources. If you're in a high-risk area and can't confirm your status, treat any warning as an order and leave.
What should I take if I have to evacuate because of the Babylon Fire?
Prepare a go-bag in advance with: medications (a week's supply), important documents (ID, insurance cards, passports) or a USB with digital copies, phone charger and backup battery, cash, three days of clothes, water and non-perishable food, a first aid kit, and pet supplies if applicable. If you have time before leaving: take photos of your home and valuables for insurance purposes, close all windows and doors, move outdoor furniture inside, turn off gas, and leave exterior lights on so the home is visible in smoke. Don't wait until the last moment — roads become dangerously congested when orders are issued.
How do I sign up for free wildfire alerts near the Babylon Fire?
Use the alert signup on this page to receive free email notifications when fires are reported near an address you choose, when Red Flag Warnings are issued for your area, or when a fire you're tracking significantly changes. You can also sign up for your county's emergency alert system (typically Wireless Emergency Alerts plus a county-specific opt-in) and follow your local sheriff on social media. No single source covers everything — use at least two.
Where can I find official updates directly from the Babylon Fire incident team?
The incident management team publishes daily situation reports and operational updates to InciWeb (inciweb.wildfire.gov) — the official federal wildfire incident information system. Look up the fire by name to find its dedicated incident page with press releases, closure maps, and contact information. Many incident teams also post to a dedicated Facebook page. Your county Office of Emergency Services is the primary source for evacuation and road closure information specific to your community.
How often is the data on this page updated?
The headline figures (acres, containment, personnel) are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed each time this page loads. NIFC data is typically updated once or twice daily by incident agencies — usually in the morning after overnight aerial mapping. The written daily briefing is regenerated automatically every few hours. For the most time-sensitive information during an active incident, check InciWeb and your local county emergency management office, as official reports there often appear before NIFC data is refreshed.
Does homeowners insurance cover wildfire damage?
Standard homeowners insurance (HO-3 policies) typically covers damage from wildfire under the "fire" peril, including the dwelling, other structures, and personal property. However, many insurers have been dropping coverage or non-renewing policies in high-risk California ZIP codes and other wildfire-prone areas. If your insurer dropped you, California's FAIR Plan (and similar state programs in other states) provides basic fire coverage as a last resort. After a wildfire, document all damage with photos before any cleanup, file your claim promptly, and keep receipts for additional living expenses — those are typically covered too. Check the policy's wildfire-specific exclusions and your coverage limits carefully.
How long does it take to fully contain a wildfire?
It depends almost entirely on size, terrain, fuel type, and weather. A small grass fire in flat terrain can be contained in hours. A large fire in steep, rugged terrain with dense chaparral or timber can take weeks or months — the 2020 August Complex in California took over two months and 1 million acres. Dry, windy conditions can undo days of progress overnight. Containment typically accelerates once temperatures drop and humidity rises. After full containment, mop-up operations (extinguishing hot spots, monitoring the perimeter) continue for weeks to prevent re-ignition.
What causes wildfires to spread rapidly?
The "fire triangle" of fuel, heat, and oxygen governs spread, but three conditions drive explosive growth: low relative humidity (below 15% makes fuels extremely receptive), high winds (spread flames ahead of the fire and loft embers — called spotting — that start new ignitions far ahead of the main fire), and steep terrain (fire races uphill because the slope pre-heats fuel above it). A fourth factor is drought-stressed or dead vegetation, which ignites and burns far more intensely than healthy plants. When all four conditions align — a dry spell, strong offshore or downslope wind event, cured grass or chaparral, and a spark — fires can grow from dozens to tens of thousands of acres in a single afternoon.
Babylon Fire — incident details
- Discovered
- June 26, 2026
- Cause
- Natural
- Primary fuel
- Timber (Litter and Understory)
- Managing organization
- Type 3 IC
- Personnel assigned
- 62
- Estimated cost to date
- $62.8M
- Protecting unit
- UTMLF
- Landowner
- Federal
- Incident ID (IRWIN)
- 2026-UTMLF-005112
Source: National Interagency Fire Center (NIFC) WFIGS feed.
Get Free Alerts When a Wildfire Is Reported Near Your Home
Five seconds now, a head start when it matters: type your email, and we watch this exact address against the same official feeds firefighters use, around the clock. A new fire nearby, dangerous fire weather, a fire turning your way — we email you when official feeds report it. 100% free, unsubscribe anytime.
You’re signed up for free alerts. Here’s exactly what they cover:
A fire starts nearby
We'll email you the moment official feeds report a new wildfire close to your home.
Dangerous fire weather
We'll email you on hot, dry, windy days when fires spread fastest (officially called a 'Red Flag Warning').
A nearby fire grows fast
We'll email you if a fire near you suddenly gets bigger or turns your way.
Any address, 24/7
We're watching your exact address around the clock, starting now.
Free wildfire alerts — unsubscribe anytime. Next you’ll add your home address so alerts are pinpointed to your property.
FireRisk.ai is for awareness only, not emergency alerts. For evacuations, follow local authorities and official emergency alerts. Call 911 for immediate emergencies. Alert Terms
Related
Sources
All figures on this page are sourced directly from official U.S. government and agency feeds. No proprietary or estimated data is used without clear labeling.
- National Interagency Fire Center (NIFC) — WFIGS ↗
Live fire size, containment, personnel, cost, cause, and incident boundaries
- InciWeb — Incident Information System ↗
Official incident management team updates, press releases, and evacuation notices
- National Weather Service (NWS) ↗
Red Flag Warnings, evacuation-level weather alerts, and fire-weather forecasts
- NASA FIRMS — Fire Information for Resource Management ↗
Satellite-detected active fire hotspots (VIIRS/MODIS)
- AirNow / EPA ↗
Air Quality Index (AQI) and smoke concentration near the incident
- Open-Meteo ↗
Fire-weather forecast (temperature, relative humidity, wind gusts) for the incident area
Headline figures are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed and National Weather Service feed; the written briefing is generated automatically and is for awareness only — reported values lag real-time ground conditions. This is not an emergency service or official incident communication. In a wildfire emergency, call 911 and follow your local authorities and evacuation orders. Briefing last generated Thu, 13 Aug 2026 00:00:40 GMT.