Live ยท NIFC ยท analysis July 28, 2026

0433 BREWER Fire โ€” Latest News & Live Update

Jefferson County, OR

FireRisk.ai ยท Updated August 31, 2026

Size
70,821 ac
+19,513 ac since last report
Contained
100%
+95 pts since last report
Personnel
1,111
Cause
Natural
Est. cost $18.1MDiscovered July 15, 2026Managing org Complex Incident Management TeamPrimary fuel Short Grass (1 foot)
Briefing from July 28, 2026 ยท figures refreshed July 28, 2026Final

๐Ÿ”บ Fire grew 19,513 acres since the last report โ€” it is still spreading.

โœ… Containment up 95% โ€” firefighters have secured more of the perimeter, meaning less of the fire edge can spread freely.

The Brewer Fire in Jefferson County, Oregon, reached full containment on July 28 after growing by 19,513 acres since the previous report, marking a decisive shift in the nearly two-week suppression effort. The fire, discovered July 15 as a natural-caused ignition, burned across 70,821 acres before crews achieved 100 percent containmentโ€”a gain of 95 percentage points from the last update.

The fire's rapid spread through short grass fuel, which typically carries flame quickly and intensely, initially challenged containment efforts across the perimeter. A Complex Incident Management Team deployed 1,111 personnel to suppress the blaze, holding and extending defensive lines as the fire's forward progress slowed. The shift from active growth to full containment signals that crews have successfully established control around all edges of the burn area.

The Brewer Fire is now fully contained and no longer spreading. Suppression costs have reached $18,126,785 to date. Residents should continue to follow guidance from local authorities and official incident updates as mop-up and recovery operations proceed.

FireRisk.ai covers active wildfire incidents and home fire risk using official NIFC, National Weather Service, and NASA FIRMS data. Briefings are generated automatically from verified official feeds and reviewed for accuracy.

Update timeline

July 28, 2026
0433 BREWER Fire โ€” 70,821 acres, 100% contained

The Brewer Fire in Jefferson County, Oregon, reached full containment on July 28 after growing by 19,513 acres since the previous report, marking a decisive shift in the nearly two-week suppression effort. The fire, discovered July 15 as a natural-caused ignition, burned across 70,821 acres before crews achieved 100 percent containmentโ€”a gain of 95 percentage points from the last update.

July 27, 2026
0433 BREWER Fire โ€” 51,308 acres, 5% contained

The Brewer Fire remains largely uncontained across Jefferson County, Oregon, twelve days after discovery, with crews holding a 5 percent perimeter as the burn holds steady at 51,308 acres. The natural-caused fire, which ignited July 15 in short grass fuel, has produced no additional acreage growth since the last report, but the minimal containment gain signals that suppression efforts are still in early, active stages across most of the fire's perimeter.

July 26, 2026
0433 BREWER Fire โ€” 37,319 acres, 5% contained

The Brewer Fire has burned 37,319 acres in Jefferson County, Oregon, since its discovery on July 15, remaining at 5 percent containment as of July 26. With no change in acreage or containment reported since the previous update, the fire has stabilized in its active spread but remains largely uncontained across its perimeter.

July 25, 2026
0433 BREWER Fire โ€” 33,704 acres, 5% contained

The Brewer Fire held its footprint at 33,704 acres as of July 25, with containment remaining flat at 5 percentโ€”a sign that suppression crews are still in the early, active phase across most of the perimeter. The fire was discovered on July 15 in Jefferson County, Oregon, and has burned through short grass fuel averaging one foot in height, a condition that has sustained the fire's size over the past reporting period even as nearly 930 personnel worked the incident.

July 24, 2026
0433 BREWER Fire โ€” 32,707 acres, 5% contained

The Brewer Fire remains largely uncontained after nine days of suppression efforts in Jefferson County, Oregon. The 32,707-acre fire, discovered on July 15, has held steady at 5 percent containment, with no change in acreage or containment progress reported since the last update. Personnel have made no measurable ground since the previous report, indicating crews are engaged in active defense across most of the fire's perimeter rather than extending containment lines.

July 23, 2026
0433 BREWER Fire โ€” 29,878 acres, 5% contained

The Brewer Fire in Jefferson County, Oregon, remains largely uncontained eight days after ignition, with crews holding a 5 percent perimeter while the burn stretches across nearly 30,000 acres. Discovered on July 15, the fire has grown to 29,878 acres across short grass fuel, which can sustain rapid spread under conducive conditions.

July 22, 2026
0433 BREWER Fire โ€” 27,932 acres, 5% contained

The Brewer Fire has held at 27,932 acres with virtually no containment progress in the past day, remaining at 5 percent containment as of July 22. Discovered on July 15 in Jefferson County, Oregon, the fire continues to burn through short grass fuel with limited defensive advantage, leaving crews in early suppression across the majority of the perimeter.

July 21, 2026
0433 BREWER Fire โ€” 24,460 acres, 1% contained

The Brewer Fire in Jefferson County, Oregon, remains largely uncontained as of July 21, six days after its discovery on July 15. The fire has grown to 24,460 acres and sits at just 1 percent containment, indicating crews are in the early stages of active suppression across the perimeter with minimal progress in establishing defensible lines.

Firefighting aircraft over this fire

Live ADS-B

Latest news โ€” 0433 BREWER Fire

Auto-updating

All coverage โ†—

News links open third-party sites. For official evacuation orders follow your local fire authority and 911.

0433 BREWER Fire โ€” current status questions

Is the 0433 BREWER Fire contained?

As of July 28, 2026, the 0433 BREWER Fire is 100% contained in Jefferson County, OR. Containment means that percentage of the fire's perimeter has been secured by crews โ€” the fire can still burn inside those lines. The fire is nearing control, though full containment and mop-up operations continue. Follow your local fire authority for evacuation status.

How big is the 0433 BREWER Fire?

As of July 28, 2026, the 0433 BREWER Fire has burned 70,821 acres in Jefferson County, OR. Wildfire acreage is the estimated total area inside the fire perimeter โ€” it is updated as aerial and ground crews assess the boundary and changes frequently on active fires. One acre is roughly the size of a football field; 110.7 square miles.

When did the 0433 BREWER Fire start?

The 0433 BREWER Fire was first reported on July 15, 2026 (12 days ago) in Jefferson County, OR. The reported cause is natural. The fire's discovery date is reported by the incident agency to the National Interagency Fire Center (NIFC).

What caused the 0433 BREWER Fire?

According to NIFC reporting, the 0433 BREWER Fire was caused by natural. Cause determinations are made by trained fire investigators and may be updated as the investigation proceeds.

How many firefighters are working on the 0433 BREWER Fire?

As of July 28, 2026, 1,111 total personnel are assigned to the 0433 BREWER Fire according to NIFC. This figure includes all positions on the incident โ€” engine crews, hand crews, dozers, aircraft, logistics, and incident management team members. Large fires typically involve resources from multiple agencies and can draw crews from across the country when local resources are stretched.

How much has the 0433 BREWER Fire cost so far?

The estimated cost to suppress the 0433 BREWER Fire is $18.1 million as of July 28, 2026, according to NIFC. Wildfire suppression costs include personnel, equipment, aircraft, and logistical support. Large fires often cost millions of dollars per day at peak operations, and total costs continue to accumulate until the fire is fully contained and crews demobilize.

Who is managing the 0433 BREWER Fire response?

The 0433 BREWER Fire is being managed by Complex Incident Management Team. Wildfire incident management teams (IMTs) are classified by complexity (Type 1 being the most complex). They coordinate all suppression resources โ€” crews, aircraft, equipment โ€” and produce the official daily situation reports posted to InciWeb.

Wildfire questions โ€” 0433 BREWER Fire area

Answers apply to all active wildfires; specifics use 0433 BREWER Fire data where available.

What does the containment percentage mean for the 0433 BREWER Fire?

Containment percentage is the share of the fire's perimeter that crews have physically secured โ€” typically by cutting a firebreak or reaching a natural barrier like a road or river. A fire at 40% contained means 40% of the edge has a line that crews are confident will hold; the remaining 60% is still open. The fire can continue burning inside those lines even at high containment. Full containment (100%) means the entire perimeter is secured, though the fire may still smolder inside for weeks during mop-up.

How is wildfire acreage measured?

Wildfire acreage is the estimated total area enclosed within the fire's perimeter, not just the actively burning area. Crews and aircraft sketch the perimeter using GPS tracks, aerial infrared flights (typically flown at night), and satellite imagery. Because mapping lags the actual fire edge by hours to days, reported acreage is always an estimate โ€” especially on a fast-moving fire. One square mile equals 640 acres; compare the acreage figure to the map perimeter for a sense of scale.

Is the smoke from the 0433 BREWER Fire dangerous to breathe?

Wildfire smoke contains fine particles (PM2.5), carbon monoxide, and other compounds that are harmful to breathe โ€” especially for children, the elderly, pregnant women, and anyone with heart or lung conditions. When AQI (Air Quality Index) is in the "Unhealthy" range (151+), everyone should reduce outdoor activity. At "Very Unhealthy" (201+), stay indoors with windows closed, run an air purifier if you have one, and wear an N95 or KN95 mask if you must go outside. Check the air quality tab on this fire's page or airnow.gov for live AQI readings near you.

How far does smoke from a wildfire travel?

Wildfire smoke can travel hundreds to thousands of miles depending on wind patterns and fire size. Smoke from large western U.S. fires has been recorded as far east as the Atlantic coast. At ground level, heavy smoke concentrations are typically within 50โ€“150 miles of the fire, but air quality impacts can extend much further at altitude. Smoke dispersal depends heavily on upper-level wind direction, humidity, and whether the fire is producing a large smoke column. Check the live smoke map for current plume extent.

What is the difference between an evacuation order and an evacuation warning?

An evacuation order means leave immediately โ€” conditions pose an immediate threat to life. You should not wait to gather belongings. An evacuation warning means be ready to leave at a moment's notice; conditions are threatening but not yet at the leave-now stage. Some jurisdictions use a three-tier system adding an "evacuation advisory" as the lowest level (monitor conditions). Zone designations (A, B, C or color-coded) indicate which areas are affected. Always follow the instructions of your local sheriff or fire authority โ€” these designations can change within minutes as fire conditions shift.

How do I find out if my address is in an evacuation zone for the 0433 BREWER Fire?

The most reliable sources are your county sheriff's office, local Office of Emergency Services, or state emergency management agency โ€” they issue and update zone boundaries. Many counties now have online zone-lookup tools where you can type your address, and Genasys Protect (protect.genasys.com) covers much of the West. FireRisk.ai sweeps official evacuation feeds every 5 minutes and paints active zones on this fire's map where coverage exists. The evacuation tab on this fire's status page links to official county sources. If you're in a high-risk area and can't confirm your status, treat any warning as an order and leave.

What should I take if I have to evacuate because of the 0433 BREWER Fire?

Prepare a go-bag in advance with: medications (a week's supply), important documents (ID, insurance cards, passports) or a USB with digital copies, phone charger and backup battery, cash, three days of clothes, water and non-perishable food, a first aid kit, and pet supplies if applicable. If you have time before leaving: take photos of your home and valuables for insurance purposes, close all windows and doors, move outdoor furniture inside, turn off gas, and leave exterior lights on so the home is visible in smoke. Don't wait until the last moment โ€” roads become dangerously congested when orders are issued.

How do I sign up for free wildfire alerts near the 0433 BREWER Fire?

Use the alert signup on this page to receive free email notifications when fires are reported near an address you choose, when Red Flag Warnings are issued for your area, or when a fire you're tracking significantly changes. You can also sign up for your county's emergency alert system (typically Wireless Emergency Alerts plus a county-specific opt-in) and follow your local sheriff on social media. No single source covers everything โ€” use at least two.

Where can I find official updates directly from the 0433 BREWER Fire incident team?

The incident management team publishes daily situation reports and operational updates to InciWeb (inciweb.wildfire.gov) โ€” the official federal wildfire incident information system. Look up the fire by name to find its dedicated incident page with press releases, closure maps, and contact information. Many incident teams also post to a dedicated Facebook page. Your county Office of Emergency Services is the primary source for evacuation and road closure information specific to your community.

How often is the data on this page updated?

The headline figures (acres, containment, personnel) are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed each time this page loads. NIFC data is typically updated once or twice daily by incident agencies โ€” usually in the morning after overnight aerial mapping. The written daily briefing is regenerated automatically every few hours. For the most time-sensitive information during an active incident, check InciWeb and your local county emergency management office, as official reports there often appear before NIFC data is refreshed.

Does homeowners insurance cover wildfire damage?

Standard homeowners insurance (HO-3 policies) typically covers damage from wildfire under the "fire" peril, including the dwelling, other structures, and personal property. However, many insurers have been dropping coverage or non-renewing policies in high-risk California ZIP codes and other wildfire-prone areas. If your insurer dropped you, California's FAIR Plan (and similar state programs in other states) provides basic fire coverage as a last resort. After a wildfire, document all damage with photos before any cleanup, file your claim promptly, and keep receipts for additional living expenses โ€” those are typically covered too. Check the policy's wildfire-specific exclusions and your coverage limits carefully.

How long does it take to fully contain a wildfire?

It depends almost entirely on size, terrain, fuel type, and weather. A small grass fire in flat terrain can be contained in hours. A large fire in steep, rugged terrain with dense chaparral or timber can take weeks or months โ€” the 2020 August Complex in California took over two months and 1 million acres. Dry, windy conditions can undo days of progress overnight. Containment typically accelerates once temperatures drop and humidity rises. After full containment, mop-up operations (extinguishing hot spots, monitoring the perimeter) continue for weeks to prevent re-ignition.

What causes wildfires to spread rapidly?

The "fire triangle" of fuel, heat, and oxygen governs spread, but three conditions drive explosive growth: low relative humidity (below 15% makes fuels extremely receptive), high winds (spread flames ahead of the fire and loft embers โ€” called spotting โ€” that start new ignitions far ahead of the main fire), and steep terrain (fire races uphill because the slope pre-heats fuel above it). A fourth factor is drought-stressed or dead vegetation, which ignites and burns far more intensely than healthy plants. When all four conditions align โ€” a dry spell, strong offshore or downslope wind event, cured grass or chaparral, and a spark โ€” fires can grow from dozens to tens of thousands of acres in a single afternoon.

0433 BREWER Fire โ€” incident details

Discovered
July 15, 2026
Cause
Natural
Primary fuel
Short Grass (1 foot)
Managing organization
Complex Incident Management Team
Personnel assigned
1,111
Estimated cost to date
$18.1M
Protecting unit
OR951S
Landowner
Private
Incident ID (IRWIN)
2026-OR951S-000433

Source: National Interagency Fire Center (NIFC) WFIGS feed.

!

Get Free Alerts When a Wildfire Is Reported Near Your Home

Five seconds now, a head start when it matters: type your email, and we watch this exact address against the same official feeds firefighters use, around the clock. A new fire nearby, dangerous fire weather, a fire turning your way โ€” we email you when official feeds report it. 100% free, unsubscribe anytime.

Youโ€™re signed up for free alerts. Hereโ€™s exactly what they cover:

โšก

A fire starts nearby

We'll email you the moment official feeds report a new wildfire close to your home.

๐Ÿšฉ

Dangerous fire weather

We'll email you on hot, dry, windy days when fires spread fastest (officially called a 'Red Flag Warning').

๐Ÿ“ˆ

A nearby fire grows fast

We'll email you if a fire near you suddenly gets bigger or turns your way.

๐Ÿ“

Any address, 24/7

We're watching your exact address around the clock, starting now.

Free wildfire alerts โ€” unsubscribe anytime. Next youโ€™ll add your home address so alerts are pinpointed to your property.

FireRisk.ai is for awareness only, not emergency alerts. For evacuations, follow local authorities and official emergency alerts. Call 911 for immediate emergencies. Alert Terms

Related

Sources

All figures on this page are sourced directly from official U.S. government and agency feeds. No proprietary or estimated data is used without clear labeling.

Headline figures are pulled live from the National Interagency Fire Center (NIFC) WFIGS feed and National Weather Service feed; the written briefing is generated automatically and is for awareness only โ€” reported values lag real-time ground conditions. This is not an emergency service or official incident communication. In a wildfire emergency, call 911 and follow your local authorities and evacuation orders. Briefing last generated Tue, 28 Jul 2026 15:01:22 GMT.